Most Widely Used Bearings: Deep Groove Ball Bearings

 Deep Groove Ball Bearings

Deep groove ball bearings are the most widely used bearings in the industry, they are composed of the outer ring, inner ring, bearing cages, balls, and seals. Deep groove ball bearings are available in both single and double-row designs. Single row ball bearings are the most popular of all rolling bearings. They are simple in design, nonseparable and suitable for high-speed operation, and require little attention in service.

Bearing clearance refers to the amount of clearance between the inner ring, outer ring, and balls. clearance will influence the bearing life span and rotation speed, you need to choose different clearance when using in different conditions, According to the international standard clearance is classified into 4 groups. Small Clearance ( C1/C2), Normal Clearance (C0), Bigger clearance (C3), Big clearance (C4/C5) can be produced bearings according to the customer’s requirement of clearance.

The deep groove ball bearings deep groove enable axial loads to be carried in either direction. Bearings are available with shields and seals can be supplied with the correct quantity of grease and used in operating temperatures between -30 to + 110 deg Celsius. Special bearings operate over a wide range. Re-lubrication in service is not required, Shielded and sealed bearings are primarily intended for applications where the inner ring rotates. In the case where the outer ring rotates, there is a risk that lubricant will be lost and the manufacturer should be consulted.

Deep groove ball bearings come in many sizes, materials, and varieties according to customer needs, including special industrial needs such as high-temperature applications. High-temperature bearings are made to withstand temperatures up to 350 deg Celsius.

 

Many Industries use deep groove ball bearings such as:

ü Agricultural

ü Food Processing

ü Machine tools

ü Material handling

ü Medical / Pharmaceutical

ü Printing

ü Railway and Transportation

ü Wind Energy

ü Automation control

ü Home Appliances

 

>> Shop for Single-Row Deep Groove Ball Bearings here

 

Features of deep groove ball bearings:

Simple in design with its wide dimensional scope: They are simple in design robust in operation and easy to maintain.

High rotational speed: Deep groove ball bearings are made with high-quality steel for premium performance in demanding applications where there are high loads and high rotational speeds.

Capable of receiving radial and bidirectional axial load: Deep groove ball bearing can support axial forces in both directions as well as radial forces. They had the capacity to handle greater loads and were versatile enough to be used in many applications.

 

Advantages of deep groove ball bearings:

Lower Noise Level means quieter in operation: The deep groove ball bearing is quieter in operation due to better quality of balls, the optimized surfaces, the higher stability of cages. They run very smoothly.

Lower Friction leads to lower Energy cost for operation: The friction in the bearing is reduced by optimizing surfaces, waviness, and roundness. The lower friction gives longer life.

Improved Sealing means efficient protection against contamination: Deep groove ball bearings with seals on both sides are greased using a high quality of grease, lubricated for life, and suitable for high speeds. They provide excellent sealing efficiency and exclusion of contaminants.

Better bearing life due to reduced lubricant loss: Deep groove ball bearings filled with customer-specific greases to meet specific application needs and operating conditions.

 

 

Truck Bearing Manufacturer

 

Introduction of truck bearing manufacturer

Truck bearings are an important part of truck tires. As trucks are often driven on muddy, bumpy roads with poor road conditions and are often overloaded, the quality requirements for truck bearings are even more stringent. Qianyu Auto Parts Co., Ltd. is a professional truck bearing manufacturer with more than 20 years of experience in truck bearing manufacturing. The products have passed ISO/TS16949, ISO9001, EU CE certification and other certificates, and the quality is reliable. Approved by customers in more than 50 countries.

 

Advantages of our truck bearing

u Cost-effective

u Lubrication for life

u Maintenance free and durable

u Higher requirements for oil seals and grease

u Introduce and update the latest production technology in the industry

 

About customization

As a truck bearing manufacturer, we also support OEM customization, OEM customers' brands. 

We support printing your brand name on the packaging or on the product.

 

Contact Us

Our working time is 08:00-18:00 from Monday to Friday in Beijing Time. 

All emails will be replied in 24 hours,Because of the time difference, we  may not reply your 

email immediately or have a little delay due to the weekend or holiday. 

Pleaseunderstand that. 

We devote to making the best service for you. We look forward to serving you.

Any questions, please contact us directly or via our email. 

Your emails are warmly welcomed.